CARE-CODE Kit – 1 cigarette lighter transmitter and 1 receiver • CC-K-AC
The kit consists of a receiver connected to the motorized mechanism and a cigarette lighter transmitter plugged into the vehicle’s cigarette lighter socket; the two communicate via encrypted radio frequency.
When the button on the cigarette lighter transmitter is pressed, it powers on and remotely controls the receiver’s output for 2 seconds—enough time to simulate pressing the manual switch to open the door or gate (up to 10 receivers can be controlled).
It is also possible to control another automated device, as the receiver has two channels. And a single receiver can accept an unlimited number of transmitters!
Once the command has been transmitted, the transmitter switches to extended standby mode to minimize power consumption.
Visit the website http://care-code.com
Émetteur :
– Alimentation : 1 0-24 V/DC
– Consommation en veille : <<2mA/H
– Consommation en émission : 35 mA/H
– Fréquence porteuse : 868,5 Mhz
– Portée maximum : entre 25 et 50 mètres – Modulation : FSK
– Codage : 128 bits
– Puissance émission : ‹ 1 0dB
– Sensibilité Réception : -1 1 2dBm
– Température : -20°C / +70°C
– Dimensions : 35 x 35 x 1 5 mm
– Poids : 14g
Récepteur :
– Nombres de sorties : 2 (MOS 1 A)
– Mémoire émetteur : illimitée
– Alimentation : 10-24v ac/dc
– Raccordement : 4 fils
– Consommation : 4 mA
– Fréquence porteuse : 868,5 Mhz
– Portée maximum : entre 25 et 50 m
– Modulation : FSK
– Sensibilité : -106 dB
– Température : -20°C / +70°C
– Dimensions : 35 x 35 x 1 5 mm
– Poids : 14g