CARE-CODE Kit – 2 transmitters and 1 receiver • CC-K-2E

The kit consists of a receiver connected to the motorized mechanism and two transmitters connected to two vehicles; all three communicate via encrypted radio frequency.

When the headlight flash button is pressed (for example), the transmitter—which is powered on at that moment—remotely controls the receiver’s output for 2 seconds, simulating a press of the manual switch to open the door or gate.

It is also possible to control another automated system, as the receiver has two channels. And a single receiver can accept an unlimited number of transmitters!

Once the command has been transmitted, the transmitter switches to extended standby mode to minimize power consumption.

Visit the website http://care-code.com

Transmitter:

– Power supply: 10–24 V DC

– Standby current consumption: <<2 mA/h

– Transmission current consumption: 35 mA/h

– Carrier frequency: 868.5 MHz

– Maximum range: between 25 and 50 meters – Modulation: FSK

– Encoding: 128 bits

– Transmission power: ‹ 1 0 dB

– Receiver sensitivity: -1 1 2 dBm

– Temperature range: -20°C / +70°C

– Dimensions: 35 x 35 x 1 5 mm

– Weight: 14 g

Receiver:

– Number of outputs: 2 (MOS 1 A)

– Transmitter memory: unlimited

– Power supply: 10–24 V AC/DC

– Connection: 4-wire

– Current consumption: 4 mA

– Carrier frequency: 868.5 MHz

– Maximum range: between 25 and 50 m

– Modulation: FSK

– Sensitivity: -106 dB

– Temperature: -20°C / +70°C

– Dimensions: 35 x 35 x 1.5 mm

– Weight: 14 g